-
C1C – EZVIZ WIFI CAMERA
720p/1080p
110°/130°
Supports 2.4GHz Wi-Fi
Infrared Night Vision
Two-Way Talk
Supports MicroSD Cards (Up to 256 GB)
Wide-Angle Lens(Up to 12 meters)
P499.00C1C – EZVIZ WIFI CAMERA
P499.00 -
2 MP ColorVu Fixed Mini Bullet Camera – 2.8MM
- High quality imaging with 2 MP, 1920 × 1080 resolution
- 24/7 color imaging with F1.0 aperture
- 3D DNR technology delivers clean and sharp images
- 2.8 mm, 3.6 mm, 6 mm fixed focal lens
- Up to 20 m white light distance for bright night imaging
- One port for four switchable signals (TVI/AHD/CVI/CVBS)
- Water and dust resistant (IP67)
P370.00 -
Spring hook
- Stainless steel hook
- Long life expectancy
- Large tail to fit a range of tensioning devices
- Quick fit onto the round and flat bar insulator
P1.25Spring hook
P1.25 -
Siren 12v DC-30W
Material ABS plastic Voltage 12VDC Type 30Watt Dual Tone Decibels 108dB (15Watt)
120dB (30 watt)IP rating IP54 P250.00Siren 12v DC-30W
P250.00 -
Siren 12v dc
Material ABS plastic Voltage 12VDC Type 15Watt Decibels 108dB (15Watt)
120dB (30 watt)IP rating IP54 P73.21Siren 12v dc
P73.21 -
Loop Earth-Wall mount STR
The Wall Mounted Earth Loops are installed onto the wall protecting the bottom two wires of a wall top fence. They are used to enhance the level of security offered by an electric fence by detecting attempted separation of fence wires and leaving just enough room for natural movement of the live wire. When the live wire touches the loop a connection is made and the alarm will sound. Available in stainless steel, angled or straight to suit the type of Nemtek bracket used.
P27.00Loop Earth-Wall mount STR
P27.00 -
Loop earth – inline
Earth live loops are used to enhance the level of security offered by an electric fence by detecting attempted separation of fence wires. By creating a connection between 2 live wires and leaving just enough room for natural movement of the earth wire, the alarm will sound as the earth wire touches the earth live loop.
P5.36Loop earth – inline
P5.36 -
Gate contact inline – 3 way
The 3 way inline heavy duty sliding gate contact is used for wiring live wires in series onto a sliding gate.
The extra third insulated connector can be used to bring the earth wire onto the gate system.
The robust construction using stainless steel and brass, makes it suitable for outdoor use in most climates.
The large location plates allow for increased tolerance and easier installation.
P518.00Gate contact inline – 3 way
P518.00 -
Gate contact inline – 2 way
- Heavy duty design for all weather types
- Large location plates allow for increased tolerance
- Available with brass cable connectors or crimp lug connectors
- Available with an earth plate option with brass cable connectors
- Mounting bracket available
P370.20Gate contact inline – 2 way
P370.20 -
Ferrules – 6mm soft
Ideal for joining cables and wires permanently. Ferrules cannot be removed after use. They are rust resistant
P1.50Ferrules – 6mm soft
P1.50 -
Energizer wizord 4 – 4j
- 3.7 Joule output energy (single zone)
- Robust and flexible design for home and commercial security
- Built-in alarm monitors tampering or faults on the high voltage and earth fence wires
- Connectable to armed response radio or GSM module
- Lightning and power surge protection
- Intelligent power saving to extend battery life
- Easy-to-use tag included for controlling the energizer
- Powered by 240V mains and includes built-in battery for back-up power
- Built-in gate alarm input to monitor if the gate is open or closed
P2,402.00Energizer wizord 4 – 4j
P2,402.00 -
Energizer hammer EZ630 4J
- Monitors the fence return voltage (single zone)
- Alarms on low Voltage threshold
- Auxiliary alarm input (gate monitor)
- Siren and strobe output Remote control option
- Powers up to 2Km of fence wire (1mm)
- 4 Joule and 10KV maximum output
- Battery backup
P1,957.00Energizer hammer EZ630 4J
P1,957.00